NEW PEUGEOT LUTON VAN

Hampshire, Berkshire & West Sussex

The high capacity Luton Van is now available at Snows PEUGEOT Business Centre in Basingstoke. This converted van is part of the PEUGEOT Built for Business Range, an off the shelf programme that offers converted vans with shortened delivery times.

The Luton van has a large rectangular floor free of any obstructions such as wheels arches, with additional loading space above the cab. As the entire van is sealed your load is protected from the weather offering protection and security for your load.

To reduce fuel consumption this new Luton van has moved away from the squared off build and now has an aerodynamic pod over the cab. The body is built from lightweight, robust panels on a galvanised steel and aluminium frame, designed to provide a long working life while maximising payload capacity.

PEUGEOT LUTON VAN : SPECIFICATION

As standard the Luton van benefits from:

A protective kick strip fitted to the front bulkhead at floor level
Standard fit load securing systems and load locking strip and tie rails fitted at set heights
A robust birch plywood flooring that can be easily replaced if damaged
A lightweight alloy roller shutter door with locking handle.

With many options extras, such as:

A 500kg capacity tail lift and rear barn doors in place of the standard roller shutter door
Additional load lock tracks, tie rails and load lashing rings.

The Built for Business Luton range offers two variants based on the Boxer L3 and L4 single cab. The longer L4 models provide a high-volume body offering up to 20m³ of load space.

Model	L3 Single Cab	L4 Single Cab
Wheelbase	4,035mm	4,035mm
Internal length	3,480mm	4,150mm
Internal width	2,057mm	2,057mm
Internal height	2,235mm	2,235mm
Volume	16m³	20m³
Payload*	1,147kg	979kg

*Payload (excluding driver) is calculated including oil, water, lubricants, tools, spare wheel and 90% full fuel tank. When calculating the payload, an average figure for the driver is 75kg (Please note: drivers’ weights will vary). Additional passengers and accessories must be taken into account. It is the operator’s responsibility that the plate weights are not exceeded. Please note: Masses and Dimensions are subject to 8% engineering tolerances.

The Low-Floor Luton Van Option

PEUGEOT Built For Business range has two Luton vans models to offer, the above and the Low-Floor Luton Van.

A lower floor means that a tail lift simply isn’t needed because the rear loading height is low enough without one. Another advantage of the Low-Floor Luton is that the low floor vans have increased load volume. At 22m3, the Low-Floor Luton offers the greatest body capacity in the PEUGEOT Boxer range including the Built for Business conversions.

Payload for the standard Low-Floor Luton is 1,050kg*, while the load floor measures 4,080mm long by 2,160mm wide and 2,500mm high.